Various
Settings
How
to
operate the AUDIO CONTROL
Switching audio control modes
Various audio control modes may be fine-tuned using this procedure.
II
Press the [ENTER]
button
for
less than one second
to
select the item
to
be
adjusted.
Modes will switch in the order shown below each time the button is pressed.
BASS
~
MID
~
TREB
~
BALANCE
~
FADER
~
NON-F*1
~
LOUDNESS
~
SVC*2
~VOL~BASS'"
*1: NON-F (non-fader) Output is not affected by the settings
of
the BASS, MID and
TREB.
*2: Setting cannot be made in
FM
mode.
Rotary Mode
Mode Function
Left
Right
BASS Adjusts bass level. Decrease level. Increase level.
MID
Adjusts middle level.
Decrease level. Increase level.
(MIDDLE)
TREB
Adjusts treble level. Decrease level. Increase level.
(TREBLE)
SVC
Adjusts different volume levels for each audio
(Source Volume
Decrease level. Increase level.
Control)
mode.
FADER
Adjusts the audio balance of the front and rear Emphasizes rear Emphasizes front
speakers
speakers. speakers.
BALANCE
Adjusts the audio balance of the right and left Emphasizes the left Emphasizes the
speakers speakers. right speakers.
NON-F
Decrease the sub- Increase the sub-
(NON-FADER
Adjusts non-fader level (for subwoofer).
woofer level.
woofer level.
LEVEL)
The loudness control may be turned on to
LOUDNESS
emphasize low and high frequencies at low
Select OFF Select
ON
volume levels.
Loudness boosts bass and treble at low volumes.
64
To Next Page
Loading...
