I
Operation
I
Press
the
[SELECT] (Up/Down)
button
to
select
Outgoing
Calls
or
Incoming
Calls.
Outgoing Calls:
Outgoing call history
Incoming Calls:
Incoming call history
II
Press
the
[ENTER)
button.
If Outgoing Calls is selected
"DELETE?" and "Outgoing Calls" will
be
displayed.
If Incoming Calls is selected
"DELETE?" and "Incoming Calls" will
be
displayed.
IIPress
the
[ENTER)
button.
6
When
the
data
in
the
call
history
has been deleted, "COMPLETED"
will
be displayed.
Deleting preset dial
I
Press
the
[SELECT] (Up/Down)
button
while
in the Phone Setting
selection mode
to
select Delete.
I Press
the
[ENTER) button.
II
Press
the
[SELECT] (Up/Down)
iii
button
to
select Preset Dial.
II
Press
the
[ENTER] button.
"DELETE?" and "Preset Dial" will
be
displayed.
II
Press
the
[ENTER] button.
I
When
the
data in preset dial has
• been deleted, "COMPLETED"
will
be displayed.
58
Deleting
all
data
1
Press
the
[SELECT] (Up/Down)
button
while
in
the
Phone Setting
selection mode
to
select Delete.
I Press
the
[ENTER] button.
II
Press
the
[SELECT] (Up/Down)
iii
button
to
select ALL.
II
Press
the
[ENTER)
button.
"DELETE?" and "ALL" will
be
displayed.
IIPress
the
[ENTER)
button.
I!I
When
the
data has been deleted,
iii
"COMPLETED"
will
be displayed.
Changing
the
passcode
The passcode for the main unit can
be
changed.
4 to 8 digits must
be
used. The default setting is
1234.
I
Press the [SELECT] (Up/Down)
button
while
in
the
Phone Setting
selection
mode
to
select
Change
Code.
I Press the [ENTER] button.
Passcode and
"0*******"
will
be
displayed.
I
Press
the
[SELECT] (Up/Down)
button
to
input
numbers
between 0
and 9.
Up:
Increases the number.
Down:
Decreases the number.
To Next Page
Loading...
