EasyManua.ls Logo

Eclipse CD3200 - Category Selection; Direct Channel Selection; Manually Storing Channels into Memory; Preset Channel Scan

Eclipse CD3200
177 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
How to operate the tuner with
an
optional SIRIUS satellite radio tuner connected (U.S.A.lCANADA only)
Category
selection
The channel can
be
selected from among
categories such as POP and ROCK.
Consult the SIRIUS website for the details
of
the categories.
I
Press
the
[SELECT] (Up/Down)
button
for
less
than
one
second.
The category will switch
in
the order
shown below each time button is
pressed.
Up:
Advances to the next category.
Down:
Returns to the previous category.
Direct
channel
selection
The channel can be selected by inputting the
channel directly.
I
Press
the
[MODE]
button
for
more
than
one
second.
The mode will change to the direct
channel selection mode.
II
Press
the
[SELECT] (Right/Left)
button
to
select
the
channel
number.
Right:
Advances to the next number.
Left:
Returns to the previous number.
I
Press
the
[SELECT] (Up/Down)
button
to
select
the
channel
number
to
be
input.
Each time the button is pressed, the
channel number changes
in
the
following order.
O~1~2~3~4~5~6~7~
8~9~O~'"
II
Press the [ENTER) button.
Reception starts.
Manually
storing
channels
into
memory
This section covers the storing of stations
in
the
memory
of
numbered buttons.
I
Press
the
[SELECT] (Right/Left)
button
to
tune
to
the
channel
to
be
stored
in
the
memory.
2
Select
any
button,
from
[1]
to
[6],
and
press
it
for
more
than
two
seconds.
The tuned channel is now memorized
and stored
in
the button selected.
Repeat the procedure to stored
additional manually tuned channels
into memory,
in
turn, for buttons [1] to
[6]. These buttons are called the
preset buttons.
rnATTENTION
If the vehicle's battery is disconnected (for
repairs to the vehicle or when removing the
main unit), all channels stored
in
memory will
be lost.
In
such cases, store the channels in
memory again.
Preset channel scan
This function enables the reception
of
all the
channels
in
the preset buttons for five seconds
each.
I
Press
the
[SELECT] (Down)
button
for
more
than
one
second.
[P
SCAN] will appear
on
the display,
and channels stored
in
preset buttons
[1] through [6] will be received for five
seconds each.
93

Table of Contents

Other manuals for Eclipse CD3200

Related product manuals