About
the
optional
unit
Preset channel scan
This function enables the reception of all the
channels
in
the preset buttons for five seconds
each.
II
Press the [SELECT] (Down) button
for
more than one second.
[P
SCAN] will appear
on
the display,
and channels set
in
preset buttons
[1]
through [6] will
be
received for five
seconds each.
a
To
stop
the preset scan mode at
the desired channel, press the
[SELECT] (Down) button again.
The main unit will stay tuned
to
the
desired channel.
Switching
displays when using
the
XM
satellite radio
II
Press the [SCREENITEXT] button
for
more than one second.
Each time the button
is
pressed the
display item changes
in
the following
order:
channel name
~
category name
~
title
~
name
~
channel name
~
...
~ATTENTION
If there are no names, the "NO
DATA"
message will appear.
90
Displaying the
XM
10
Displays the
XM
10.
The
XM
10
is
necessary
when subscribing to programs, etc.
II
Press the
~/MENU]
button
for
more than one second.
The Menu selection mode
is
activated.
a
Press the [SELECT] (Up/Down)
button
to
select FUNC, and then
press the [ENTER] button.
II
Press the [SELECT] (Up/Down)
button
to
select
XM
ID.
II
Press the [ENTER] button.
The
XM
ID
is
displayed.
To Next Page
Loading...
Need help?
General
