Eclipse CD3200 - Non-Fader Phase (Non-F Phase)

II Press the [ENTER] button to select
iii LPF or HPF.
Each time the button is pressed, the
setting item changes
in the following
order.
LPF*1 ~ HPF*2
*1: The cut-off frequency is 80Hz.
*2: The cut-off frequency is 100Hz.
II
Press the [SELECT] (Up/Down)
A button to select Slope ON or OFF.
When it is ON, the slope is 12dB/oct.
Non-fader phase (Non-F Phase)
The merging of sound between the front and rear
speakers and the woofer can be improved by
selecting the phase. Switch the phase to a phase
which lets the speakers combine without any
disharmony.
I
Press the [SELECT] (Up/Down)
button to select Non-F Phase.
II Press the [ENTER] button.
The mode will change to the non-fader
phase mode.
I
Press the [SELECT] (Up/Down)
button to select Normal or
Reverse.
Up:
Normal
Down:
Reverse
How to operate the Sound Adjustment Mode
71
•