Making
a
call
using
the
phonebook
Calls can be made using the phone numbers
stored
in
the phonebook
of
the main unit.
II
Press
the
~/MENU]
button
2
Press
the
[MODE]
button
repeatedly
until
the
"Phonebook"
is
displayed.
I
While
in
the
phone
book
selection
mode,
turn
the
[VOL]
button
to
select
the
number
you
want
to
call.
II
Press
the
[ENTER]
button.
The phone number and name stored
in
the phonebook appear on the
display to confirm the number to be
dialed.
II
Press
the
[ENTER)
button.
The phone number on the display is
dialed.
Making
a
call
from
the
cell
phone
Calls can be made using a cell phone which
is
connected to the main unit.
II
Make a
call
using
the
cell phone.
rnATTENTION
•
If
the phone
number
dialed from the cell
phone has been stored in the phonebook
of
the main unit, the name and phone
number
will
appear
on
the
display.
• Depending on the cell phone, you
may
have
to use the cell phone to talk even when the
call has been made from the main unit.
The
Bluetooth
hands-free
function
Receiving a call
Calls can be received while
in
any source mode.
There is also an automatic answering function to
answer automatically. For details on answering
calls automatically, refer to "Setting Auto Answer"
on page 56.
I
When
the
phone
rings, press
the
[ENTER]
button
or
the
[SELECT]
button.
A phone connection is made, and you
can start talking.
Hanging
up
(refusing a call)
Calls can be terminated
or
refused.
II
Press
the
~/MENU]
button
•
The phone call is terminated.
rnATTENTION
Calls which have been refused are also stored
in
the memory.
Adjusting
the
volume
The volume
of
the ring tone and the voice volume
can
be
adjusted.
For safety reasons, do not adjust the volume
of
the ring tone or the voice volume while driving.
Adjusting
the
ring
tone
volume
Adjusting the volume
of
the ring tone while the
phone
is
ringing.
II
Turn
the
[VOL]
button
to
adjust
the
volume.
To
increase the ring tone volume:
Turn the [VOL] button to the right.
To
decrease the ring tone volume:
Turn the [VOL] button to the left.
51
To Next Page
Loading...
