About
the
optional
unit
How to operate the main unit with an optional CD
changer connected
This section covers the operation of
an
optional
CD
changer that is connected to the main unit.
Listening to a CD
IISwitch to CD changer mode.
For details, refer to "Switching Audio
Modes" on page
18.
Advancing to the next track or
returning to the beginning
of
the
track being played
II
Press the [SELECT] (Right/Left)
button for less than one second.
Right:
Advances to the next track.
Left:
Returns to the beginning
of
the track
being played.
(Repeat pressing for previous tracks.)
Operations during rotary mode
IITurn the [VOL] button.
Turn to the right:
Advances to the next track.
Turn to the left:
Return
to
the beginning
of
the track
being played.
Repeat turning for previous tracks.
84
Fast Forward/Rewind
Fast forward or rewind the song currently being
played.
II
Press and hold the [SELECT]
(Right/Left) button.
Right:
Fast forward.
Left:
Rewind.
Playing the beginning
of
tracks
(SCAN)
IIPress the [4 SCAN] button.
Pressing the button for less than one
second causes the changer to move
up to the next track and play it for 10
seconds, then move up to the next
track and play it for 10 seconds, and
so
on, on one CD, until the button is
pressed again.
Press the button for longer than a
second to play the first
10
seconds of
the first track of every CD loaded.
rnATTENTION
•
To
continue playing a desired track, press
the button again to stop scanning.
• After the entire disc is scanned once,
ordinary playback starts from the point
where scanning started.