Operation
II
Press
the
[ENTER] button.
rnATTENTION
If you do not want to cancel the connection,
press the [RTN/BAND] button. The BT Audio
Set selection mode
is
activated again.
4
When the disconnection has been
completed, the "COMPLETED"
message appears on the display.
The main unit
is
now disconnected
from the portable device.
(:e
and J disappear from the display.)
However,
:e
will not disappear while
Blutooth hands-free
is
connected.)
Displaying device information for
the main unit
The name of the device (main unit), the
passcode and the BD ADD (device address)
can
be
displayed.
Press the [SELECT] (Up/Down)
button while
in
the
8T
Audio Set
selection mode to select Device
INFO.
II
Press the [ENTER] button.
The name of the device and the
passcode are displayed.
rnATTENTION
Each time the [SCREENITEXT] button
is
pressed, the display changes
in
the following
way.
Device name / passcode H Device name / BD
ADD (device address)
40
II
Press the [RTNfBAND] button.
The BT Audio Set selection mode
is
activated again.
To Next Page
Loading...
