Displaying
device
information
for
the
main
unit
The name of the device (ECLIPSE ST), the
passcode (default setting - 1234), and the SD
ADD (device address) can be displayed.
1
Press
the
[SELECT] (Up/Down)
button
while
in
the
Phone
Setting
selection
mode
to
select
Device
INFO.
BPress the [ENTER] button.
The name
of
the device and Passcode
will be displayed. Pressing the
[SCREENITEXT] button will toggle
between Passcode and
SD
ADD.
Enabling
phone
numbers
to
be
input
directly
The default setting is
OFF.
Press
the
[SELECT] (Up/Down)
button
while
in
the
Phone
Setting
selection
mode
to
select
Dial
Setting.
BPress
the
[ENTER]
button.
II
Press
the
[SELECT] (Up/Down)
button
to
select
ON
or
OFF.
Deleting
data
Phonebook, Call History, Preset Dial, and All
Data can be deleted.
brn
ATTENTION
Ifthere
is no cell phone connected, the data
in
the phonebook cannot
be
deleted.
The
Bluetooth
hands-free
function
Deleting data from the phonebook
I
Press
the
[SELECT] (Up/Down)
button
while
in
the
Phone
Setting
selection
mode
to
select
Delete.
BPress the [ENTER] button.
II
Press
the
[SELECT] (Up/Down)
button
to
select
Phonebook.
II
Press the [ENTER] button.
I
Press
the
[SELECT] (Up/Down)
button
to
select
ALL,
a name,
or
a
phone
number.
ALL:
Deletes entire phonebook.
Name or phone number:
Only the selected data is deleted.
II
Press the [ENTER] button.
If ALL is selected "DELETE?" and
"ALL" will be displayed.
If a name or phone number is selected
"DELETE?" and the name or phone
number will
be
displayed.
II
Press
the
[ENTER]
button.
II
When
the
data in
the
phonebook
: has been deleted, "COMPLETED"
will
be displayed.
Deleting call
history
I
Press
the
[SELECT] (Up/Down)
button
while
in
the
Phone
Setting
selection
mode
to
select
Delete.
BPress
the
[ENTER]
button.
57
•
To Next Page
Loading...
Need help?
General
