Eclipse CD3200 - Making Changes with Function Mode; Switching the Function Mode; Setting a Station Name;Disc Title

Various Settings
Making changes with Function Mode
A variety of settings can be changed.
Switching the Function Mode
II
Press the ~/MENU] button for
more than one second.
The Menu selection mode is activated.
2
Press the [SELECT] (Up/Down)
button to select FUNC, and then
press
the [ENTER] button.
The function mode
is activated.
II
Press the [SELECT] (Up/Down)
button to select a setting item.
When the button is pressed, the
setting item changes
in the following
order.
STATION NAME·
1
~ DISC TITLE·
2
~
GUIDE TONE ~ Clock ON/OFF ~
Clock Adjust ~ Demo ~ HO RAOIO·
3
~ AUX ON/ OFF·
4
~ AUX Sens·
4
~
Steering SW ~ SIRIUS 10.
5
~ XM 10.
6
~ Phone Setting·? ~ BT Audio Set·
8
*1: Cannot make settings other than
for tuner operation.
*2: Cannot make settings other than
for CD/CD changer operation.
*3: This setting can only be chosen
when
an optional HD Radio tuner
unit is connected. (Refer
to page
86 for details on HD Radio
operation.)
*4: Refer to page 101 for detail on
AUX operation.
*5: This setting can only be chosen
when
an optional SIRIUS Satellite
radio tuner unit
is connected.
(Refer to page 94 for details
on
SIRIUS Satellite radio operation.)
76
*6: This setting can only be chosen
when
an optional XM Satellite
radio tuner unit
is connected.
(Refer to page
90 for details on XM
Satellite radio operation.)
*7: For details, refer to "Setting the
Bluetooth hands-free function"
on
page 52.
*8:
For details, refer to "Bluetooth
audio setup"
on page 38.
Setting a station name/disc title
The name of the station being received, or the
title
of the CD being played can be set.
bId ATTENTION
Not available with HO-Radio or SAT radio.
I
Press the [SELECT] (Up/Down)
button to select Station Name or
Title.
Station Name or Title will
be selected
based on the current audio mode
settings.
BPress the [ENTER] button.
The title setting mode is activated.
II
Press the [SCREENITEXT] button
to select the character type.
Pressing the button will switch types
from [ABC] (upper-case alphabet
characters) to, [123] (numeric
characters)
and then [!"#] (symbols).