Various
Settings
2
Press
the
[SELECT] (Up/Down)
button
to
adjust
the Q curve
pattern.
Each time the button is pressed, the Q
curve pattern changes
in
the following
order.
When BASS is selected:
WIDE
~
MidWIDE
~
NORMAL
~
NARROW
~
WIDE
~
...
When MIDDLE is selected:
NORMAL
~
NARROW
~
NORMAL
~
When TREBLE is selected:
NORMAL (Fixed)
I!I
Press the [SELECT] (Right/Left)
iii
button
to
adjust
the frequency.
Each time the button is pressed, the
frequency changes
in
the following
order.
When BASS is selected:
60Hz
~
80Hz
~
1
OOHz
~
120Hz
~
60Hz~
...
When MIDDLE is selected:
700Hz (fixed)
When TREBLE is selected:
7.5kHz
~
10kHz
~
12.5kHz
~
15kHz
~
7.5kHz~
...
rnATTENTION
• The median frequency and the Q curve you
set are used for BASS, MIDDLE and
TREBLE in the audio control mode. (For
details, Refer to "How to operate the AUDIO
CONTROL" on page 64.)
• When the median frequency and the Q
curve are adjusted, CUSTOM EQ is also
updated.
70
Position
selector
The sound field can
be
adjusted for the listener's
seat position.
II
Press the [SELECT] (Up/Down)
button
to
select Position Sel.
EI
Press the [ENTER] button.
The position selector setting mode is
activated.
I
Press the [ENTER]
or
[SELECT]
(Up/Down/Right/Left)
button
to
select the
position
you
want.
When each button is pressedI the
position is changed as follows.
ENTER:
OFF
Up:
FRONT
Down:
REAR
Right:
FRONT-RIGHT
Left:
FRONT-LEFT
Crossover
adjustment
(X-Over)
Specified frequency bands are allocated to each
speaker for improved sound integration.
II
Press the [SELECT] (Up/Down)
button
to
select the X-Over.
EI
Press the [ENTER] button.
The crossover setting mode is
activated.
To Next Page
Loading...
