Eclipse CD3200 - Changing Auxiliary Input Sensitivity

Changing auxiliary input sensitivity
The sensitivity of the auxiliary mode can be
changed.
I
Press the rA'/MENU] button for
more than one second.
The Menu selection mode is activated.
2
Press the [SELECT] (Up/Down)
button to select FUNC, and then
press the [ENTER] button.
The function mode is activated.
II Press the [SELECT] (Up/Down)
iii button to select AUX Sens.
The AUX sensitivity mode is activated.
I
Press the [SELECT] (Up/Down)
i button to select the sensitivity
mode.
Pressing the button allows you to
toggle through sensitivity modes as
follows:
Low ~ Mid ~ Hi ~ Low ~ ...
The selected settings will take effect.
Others
101
•