Ecoray HF-525Plus - Page 148

148
Technical Publication Document NO: SYSTEM-007-ENG (Ver.1.1)
HF-525Plus Installation, Operation and Service Manual
No.
Functions
Description of functions
1
Saving data
Saving and output the calibration data.
(This function is only used in the manufacturing process)
2
Selection of communication
port
Selection of communication port between PC and
calibration program.
3
Selection of X-ray tube
functions
Selection of the location and anode stator of X-ray tube.
Indication of the current state for ready, exposure and
overload.
4
Indication of X-ray exposure
parameters
Selection and indication of kV, mA and exposure time for
fluoroscopy.
5
Selection of other functions
Selection of bucky, AEC, MC and focal spot.
6
Indication of X-ray exposure
parameters
Selection and indication of kV, mA and exposure time for
radiography.