Ecoray HF-525Plus - Page 149

149
Technical Publication Document NO: SYSTEM-007-ENG (Ver.1.1)
HF-525Plus Installation, Operation and Service Manual
6.5.2 Setup Part
● Possible select the capacity of generator and the filament preheat voltage.
No.
Functions
Description of functions
7
Selection of bucky function
Selection of each bucky operating mode.
8
Indication of product failure
Indication of product failure and description.
9
Indication of data No.
Indication of identification for calibration data and
number of X-ray exposures.
10
Selection of filament preheat
voltage
Selection of filament preheat voltage for “small or large
filament”
11
Selection of capacity of
generator
Selection of minimum or maximum value for “kV and
mA”
12
Shoe calibration window
Program execution for calibration window part
6.5.3 Calibration Window Part
● Adjustment, indication and saving data of kV, mA.