57
Technical Publication Document NO: SYSTEM-007-ENG (Ver.1.1)
HF-525Plus Installation, Operation and Service Manual
5.9.6 Setup & Demo mode
5.9.6.1 Setup mode
Setup mode is composed of Tube selection, Generator Limit, System setting, Console,
Communication, AEC, Tube Calibration, etc.
(1) X-Ray Console’s Reset Switch (Picture 1) and Power On Switch (Picture 2) are pushed
simultaneously and enter OP console.
(2) Setup menu is to enter by Setup mode and changing to different function Switch. Setup Menu’s
choice is to Enter Setup mode and Operate by pushing switch
To Next Page
Loading...
