70
Technical Publication Document NO: SYSTEM-007-ENG (Ver.1.1)
HF-525Plus Installation, Operation and Service Manual
■ AEC & ABC set
(1) Set up AEC Function.
●. Entering by System setting mode, and pushing “Changing Data Switch” (Picture 1), and entering by
“AEC and ABC set” mode (Picture 1)
● Pushing “KV Up & Down Switch” (Picture2) to set up AEC (Picture 4).
● Changed Data can saved using Memory “M” Switch (Picture 5) and pushed until “Beep” ends.
(Buzzer occurs 10 seconds).
(2) ABC mode does not support HF-525Plus
■ R&F REMOTE mode set
R&F REMOTE mode does not support HF-525Plus
■ Pulse mode set
Pulse mode does not support HF-525Plus.
To Next Page
Loading...
