Acclarix AX8/Acclarix AX7 Diagnostic Ultrasound System User Manual Presets
- 145 -
Unit Settings
The system supports following unit settings:
Distance: Set the default unit of distance measurement. "mm" and "cm" are available.
Area: Set the default unit of area measurement. "mm
2
" and "cm
2
" are available.
Volume: Set the default unit of volume measurement. "mm
3
" and "cm
3
" are available.
Cardiac Settings
The system supports following Cardiac measurement settings:
EDV/ESV: set the author of the formula that is used in EDV/ESV calculation. There are
three options: Teichholz, Gibson and Cube.
HR Cycle: set the number of heartbeats that are assumed in the HR or FHR measurement
calculation. Range: 1-8.
Fix Caliper By
Select the way for fixing caliper(completing measurements). Available options include Freeze,
Store, Comment and Body Mark.
OB Settings
The system supports the following OB measurement settings:
Fetal Age: set equation for measurements which are used for calculating fetal age.
Fetal Growth: set equation for measurements which are used for calculating fetal growth.
Estimated Fetus Weight: select an equation for the Estimated Fetus Weight calculation.
Growth Curves Display: set single or quad curves as the default display format for the
Growth Curves.
Default GA display: set the CUA (Composite Ultrasound Age) or AUA (Average Ultrasound
Age) as a default result displayed in the worksheet.
GP Display Format: set the display format of fetal growth percentage on growth curve
graphic. Available display formats include: No(not display the growth percentage), % and
SD (standard deviation).
Swipe In Measure
Disable swipe in measure: set whether to disable swipe area on the trackpad for cine
while measurement is active.
Measure Hardkey
Invoke Measurements: set whether Generic measurement or Application measurement
function is invoked by default when pressing <Measure> hardkey on the console.
To Next Page
Loading...
Need help?
General
