12. Spares and accessories
WARNING:
When re
turning the dry pumping system to our service centre or our other company,
the requirements of Service on page 73, Spares and accessories on page 74 and
Return the equipment or components for service on page 73 must be complied with.
Note:
The oil must not be drained from the dr
y pumping system. It must be clearly stated that
the pump is full of oil when compleng the HS2 form.
Our products, spares and accessories are available from our companies and distributors
worldwide. These centres employ service engineers who have undergone our
comprehensive training courses. Order the spare parts and accessories from our nearest
company or distributor. When ordering, state for each part required:
1. Model and item number of the equipment.
2. Serial number (if any).
3. Item number and descripon of the part.
Table 24
Accessories
Descripon
Item Number
Exhaust check valve kit NW50 for the systems A50790000
Accessory modules:
Cleanable, drainable silencer M58810141
Booster support M58810148
Castors M58810149
Purge free kit M58810144
DP clean/solvent ush kit M58810146
Inlet valve ISO100 M58810145
Probus module for GA500 M58810147
Table 25
Spares
Spare
Item Number
Drynert 25/6 lubricant:
1 kg (529 ml)
5 kg (2646 ml)
H11312021
H11312025
Cubicle vent lter kit G1950851774
Blo
w o valve service kit 750 3490790545
Blow o valve service kit 450 3490790546
For informaon about all other spar
es, refer to the customer parts manual M58840845.
07/2021 - ©Edwards Limited
Page 74A41870880_A
A41870880_A - Spares and accessories