Edwards EXS Series - Page 76

This product has been manufactured under a quality management system certified to ISO 9001:2015
P20050051A
EU Declaration of Conformity
Edwards Ltd
Innovation Drive
Burgess Hill
West Sussex
RH15 9TW
UK
Documentation Officer
Jana Sigmunda 300
Lutín , 78349
Czech Republic
T: +42(0) 580 582 728
documentation@edwardsvacuum.com
The product specified and listed below
EXS750 HV MD A418709XX
EXS450 HV MD A418409XX
XX=00~99 depending on different variants
Is in conformity with the relevant requirements of European CE legislation:
2006/42/EC
Machinery directive
2014/30/EU
Electromagnetic compatibility (EMC) directive
Class A Emissions, Industrial Immunity
2011/65/EU
Restriction of certain hazardous substances (RoHS) directive
as amended by Delegated Directive (EU) 2015/863
Based on the relevant requirements of harmonised standards:
EN ISO 12100:2010
Safety of machinery. General principles for design. Risk assessment and risk reduction
EN 1012-2:1996 +A1:2009
Compressors and vacuum pumps. Safety requirements. Vacuum pumps
EN 60204-1: 2018
Safety of machinery. Electrical equipment of machines. General requirements
EN 61000-6-2:2005
Electromagnetic Compatibility (EMC) - Part 6-2: Generic Industrial Immunity Standard
EN 61000-6-4:2007+A1:2011
Electromagnetic Compatibility (EMC)–- Part 6-4: Generic Industrial Emission Standard
EN 61800-3:2004+A1:2012
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific
test methods
This declaration, based on the requirements of the listed Directives and EN ISO/IEC 17050-1, covers all product
serial numbers from this date on: 2021-07-14
You must retain the signed legal declaration for future reference
This declaration becomes invalid if modifications are made to the product without prior agreement.
Andries De Boc
k – Vice President Engineering
Industry Vacuum Division - Cologne
T
erry Hong– General Manager
Qingdao, CN