This product has been manufactured under a quality management system certified to ISO 9001:2015
Declaration of Conformity
Innovation Drive
Burgess Hill
West Sussex
RH15 9TW
UK
Documentation Officer
documentation@edwardsvacuum.com
This declaration of conformity is issued under the sole responsibility of the manufacturer.
EXS750 HV MD A418709XX
EXS450 HV MD A418409XX
XX=00~99 depending on different variants
The object of the declaration described above is in conformity with relevant statutory requirements:
Supply of Machinery (Safety) Regulations 2008
The objectives of the Electrical Equipment (Safety) Regulations 2016 are governed by Annex 1 1.5.1 of this regulation.
Electromagnetic Compatibility Regulations 2016
Class A Emissions, Industrial Immunity
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations
Relevant designated standards or technical specifications are as follows:
Safety of machinery. General principles for design. Risk assessment and risk reduction
Compressors and vacuum pumps. Safety requirements. Vacuum pumps
Safety of machinery. Electrical equipment of machines. General requirements
Electromagnetic Compatibility (EMC) - Part 6-2: Generic Industrial Immunity Standard
EN 61000-6-4:2007+A1:2011
Electromagnetic Compatibility (EMC) - Part 6-4: Generic Industrial Emission Standard
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific
test methods
This declaration, based on the requirements of the listed Statutory Instruments and EN ISO/IEC 17050-1,
covers all product serial numbers from this date on: 2021-07-14
You must retain the signed legal declaration for future reference
This declaration becomes invalid if modifications are made to the product without prior agreement.
Signed for and on behalf of Edwards Ltd
ā Vice President Engineering
Industry Vacuum Division - Cologne
ā General Manager
To Next Page
Loading...
