Edwards SCU-800

SCU-800 Control Unit for Turbomolecular Pump
MT-49E-101-G
Page 101
6
STP
-
LINK
6 STP-Link
The "STP-Link" is a Windows application for operating the STP pump, confirming the pump status or
setting various settings. Table 27 shows the principal functions.
See the Instruction Manual of the "STP-Link" for the detailed specification and operating method.
Item
Functions
Confirmation function
Software version
Pump serial No.
Control unit serial No.
STP pump model
Communication specification setting
function
Remote operation mode setting
Each serial port setting
Option setting function
Rotational speed setting
TMS setting
Rotation inhibit signal setting
Emergency vent valve setting
Pump air-cooling fan setting
Warning function setting
History confirmation function
Confirmation of pump operation hours
Confirmation of control unit operation hours
Confirmation of damage integrated value
Confirmation of error history
Record function
Record of setting
Table 27 - Functions of STP-Link