EFI Pro 16h - Carriage Preparation; Removal of Carriage Shipping Brackets

Document ID: OMM-00131 Rev. E
41
3.11 Carriage Preparation
Prepare the carriage for printer operations as follows:
3.11.1 Removal of Carriage Shipping Brackets
Remove the Carriage shipping brackets as follows:
1.Remove the hardware securing the bracket to the carriage and beam on the left and right side of the carriage.
2. Remove the brackets and save for use if printer is to be moved at a later date,
Left Bracket Right Bracket
Figure 3-39: Carriage Shipping Brackets (H1625 Shown)