Chapter 1 Introduction
1-5
E1 Semi-automatic screen printer
System Manual
EKRA / Doku Eisermann 01_EINFUEHRUNG_PDF.FM
30.8.02
Commissioning
The machine is installed / assembled by trained technicians from EKRA
Eduard Kraft GmbH or authorised representatives.
Repair / modifications
If your company has its own service department, repair work can be carried
out by your personnel, provided that they have received appropriate, official
training from EKRA.
EKRA must be notified of any repair work carried out by the owner during
the warranty period.
If problems or faults occur which you cannot rectify yourself and which are
not described in this user’s manual, please contact the EKRA Service Hot-
line.
Telephone: ++49 (0) 7143/8844-0 Switchboard
++49 (0) 7143/8844-72 Service Dept.
Service Dept.Please make a note of the following details before calling
Ekra
Note:
You can obtain further contact addresses from:
EKRA Eduard Kraft GmbH
Zeppelinstrasse 16
D - 74357 Bönnigheim
Telephone: ++49 (0) 71 43 88 44-0
Facsimile: ++49 (0) 71 43 88 44 22 Sales Dept.
Facsimile: ++49 (0) 71 43 88 44 29 Service Dept.
Type of machine:
Number of machine:
Year of manufacture:
Software Version:
(might be on operation surface)
E-Plan Version:
To Next Page
Loading...
