Chapter 1 Introduction
1-7
E1 Semi-automatic screen printer
System Manual
EKRA / Doku Eisermann 01_EINFUEHRUNG_PDF.FM
30.8.02
Possible hazards when operating the machine
The E1 semi-automatic printer incorporates the very latest technology and
is built to comply with the recognised safety regulations. Nevertheless, haz-
ards which may cause injury to the user or third parties and result in dam-
age to the machine or other material assets may still exist when the
machine is being used.
The machine should only be used:
• for its intended purpose,
• if it is in perfect working order.
Faults, which may have a detrimental effect on safety, must be rectified
immediately.
Proper use
The E1 semi-automatic printer is intended for printing printable SMT mate-
rials (solder paste, SMD adhesive).
The machine can also be used for printing hybrid and solar cell media.
Any other use deviating from the machine’s intended purpose is considered
to be incorrect.
EKRA Eduard Kraft GmbH shall refuse all liability for any damage resulting
from incorrect use.
Proper use also means that:
• all information in the user’s manual must be complied with
• and the inspection and maintenance intervals must be observed.
To Next Page
Loading...
