Ekra E1 - Chapter 2 Safety; Hazards; Safety Precautions

Chapter 2 Safety / Hazards
2-1
E1 Semi-automatic screen printer
System Manual
EKRA / Doku Eisermann 02_SICHERHEIT_PDF.FM
30.8.02
2 Safety / Hazards
Safety precautions
Note:
EKRA recommends that you check all safety devices before using the
E1 semi-automatic printer.
Caution:
Always switch off the power supply at the main switch of the E1
printer before starting repair or maintenance work on the machine.
The printer must not be operated if the safety devices are not func-
tioning correctly.
Do not wear any loose-fitting clothing when working with the E1
printer.
Before commissioning the E1 printer, check whether there are any
tools or damaged or loose parts which could prevent mechanical
movement of the machine and thus cause damage.
Always wear protective gloves when handling solder paste.
Danger:
Never reach into the printer during the printing process.
In an emergency, press the emergency-stop switch immediately to
stop the E1 printer.