Chapter 4 Switching On and Off
4-2
E1 Semi-automatic screen printer
System Manual
EKRA / Doku Eisermann 04_EIN_AUS_PDF.FM
30.8.02
Switching off
Press the button on the control panel.
Turn the main switch of the screen printer on the front of the machine to
the "0" position (OFF).
⇒ The display goes out.
⇒ All poles of the machine’s electrical system are disconnected from the
mains power supply.
Emergency stop
Press the emergency-stop switch in all situations where:
• people could be injured, or
• parts of the printer could be damaged or destroyed.
Strike the red button of the emergency-stop switch with your hand.
⇒ The power supply to the screen printer is interrupted.
⇒ All moving parts are brought to a standstill.
Switching on after an emergency stop
Release the emergency-stop switch by turning the red button clock-
wise.
Press the button on the control panel.
⇒ The control voltage is switched on.
Press the foot switch.
⇒ The screen printer performs a reference drive.
Note:
If the cover is opened during the printing process without the Stop
button having been pressed first, an emergency stop is triggered.
OFF
ON
To Next Page
Loading...
