Ekra E1 - System Unit Maintenance

Chapter 9 Maintenance
9-3
E1 Semi-automatic screen printer
System Manual
EKRA / Doku Eisermann 09_WARTUNG_PDF.FM
30.8.02
Pneumatic service unit
The condensate in the water separator should be drained from time to time.
No condensate must be allowed to enter the control elements or power
components, as this may cause malfunctioning.
Fig. 30. Service unit
 Empty the water separator by pushing up the valve beneath the inspec-
tion glass with your finger to allow the condensate to drain away.
Casing
 Only use antistatic agents for cleaning the cover.
Note:
Other cleaning agents may cause damage to the covers (cracking).
Note:
The transport belts and toothed belts do not require maintenance.
Valve