CE Declaration of Conformity
in accordance with the EC Machine Directive 89/392/EEC, Appendix IIA
EKRA Eduard Kraft GmbH Maschinenfabrik •Zeppelinstr. 16 • D-74357 Bönnigheim
Phone +49-(0)7143-88 44–0 •Fax +49-(0)7143-88 44 22 • e-mail sales@ekra.com
We hereby confirm that the type of construction of:
Screen Printing Machines and Printer Lines of the following models:
Microtronic II, Microtronic III, Microtronic IV, Microtronic V, Microtronic VI, Microtronic VII,M8
Mat-S15, Mat-S20, Mat-S30, Mat-S40, Mat-S45, Mat-S50, Mat-S55, E1, E3XL, E4, E5 Series, X5 Series,
High Speed Printer, Microtronic III Line, Varistor Printing Line, Glass Printing Machine
Dryers of the following models:
IR Dryer 2500 x 600, 3500x650, TRO-REMA
Handling Devices:
Magazine Loader, Magazine Reloader, Stack Loader, Oven Loader and Reloader,
Laser Loader and Reloader, Hand-over Unit, Transport Conveyor, Control Conveyor
manufactured by EKRA Eduard Kraft GmbH (year of construction: as of 12/92)
conform to the following relevant regulations:
• EC Machine Directive 89/392 EEC, Appendix IIA of June 14, 1989
• EC Machine Directive 91/368 EEC of June 20, 1991
• EC Low-Voltage Directive 73/23 EEC
• Electromagnetic Compatibility 89/336/EEC
applied harmonized standards:
• DIN EN 292 Part 1 and Part 2 (safety of machines, devices and systems)
• DIN EN 29001 / ISO 9001 (quality standards)
• DIN EN 60204 Part 1, electrical equipment of machines
applied national standards and technical specifications:
• - VBG 4, VBG 5, VBG 7a accident prevention regulations
• - ZH 1 545 (safety regulations for screen printing machines)
• - ZH 1 597 (safety regulations for contact-free safety equipment in power-driven
facilities)
• - DIN/VDE 0530 T1 (rotating electrical machines)
• - DIN/VDE 0660 T2 (low-voltage controlgear/switchgear and switching elements)
• - DIN 57113/VDE 0113 (electrical equipment of machines)
• - DIN/VDE 0100
• - DIN 40050 (degree of protection IP)
corresponding to Appendix V of the EC Machine Directive:
• CE symbol is attached to the machine so that it is clearly visible
• Technical documentation is available for inspection at the manufacturer’s factory.
• Descriptions of the machines can be found in the relevant User Manuals
EKRA Eduard Kraft GmbH
Bönnigheim 1.12.2000 _____________________________________
W. Kraft
(General Manager)
To Next Page
Loading...
