Figure 3
Cooktop Features/Surface Cooking
CONTROL KNOBS
-
signed for ease of use and longevity. The “D” shaped
PLACEMENT OF BURNER GRATES
Place grates on the porcelain coated spill tray. See
Figure 4. Besure they are located correctly inside the
stainless steel frame.
Figure 4
IMPORTANT
Do not slide the grates on the stainless steel frame.
Doing so can damage the surface.
FLAME ADJUSTMENT
For most cooking, start on the highest control setting
and then turn to a lower one to complete the process.
Use the chart below as a guide for determining proper
type of utensil used and the amount of food being
For deep fat frying, use a thermometer and adjust the
the food will absorb the fat and be greasy. If the fat is
much food at once as the food will neither brown nor
*Flame Size Type of Cooking
stew.
*These settings are based on using medium-weight
aluminum pans with lids. Settings may vary when using
other types of pans.
Figure 5
To Next Page
Loading...
