87
2. Remove the (24) screws holding insulation
panel to the side of the range.
3. Lift the panel out, disconnect the wires to
the oven light, pull the wire harness out of the
installation panel and lift the panel off.
Removing the door hinge guides:
1. Disconnect power, and remove the insulation
side panel.
2. Remove the (2) screws holding the hinge
guides to the front of the oven
and lift the hinge guide out.
Removing the griddle orice assembly:
(36 inch models with built-in griddle)
1. Disconnect power, and remove the rear panel
from the range.
To Next Page
Loading...
