EasyManua.ls Logo

Electrolux E30GF74GPS - Electrical Power Supply Requirements

Electrolux E30GF74GPS
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...

ELECTRICAL POWER SUPPLY REQUIRE-
MENTS
It is the owner’s responsibility to ensure that the elec-
trical connection of this appliance is performed by a

minimum supply wire size and grounding, must be in


ordinances. In Canada, electrical grounding must


codes.
*



The correct voltage, frequency, and amperage must be
supplied to the appliance from a separate, grounded,
circuit that is protected by a properly sized circuit

WARNING
If the gas or electric service provided does not meet
theproductspecications,donotproceedwiththe
installation. Call the selling dealer, the gas supplier,
or a licensed electrician.
NOTES
The power supply must be properly grounded. Im-
proper grounding will result in continuous sparking
oftheelectrodes,evenafterameignition.
If there is any doubt as to whether the power supply
is properly polarized or grounded, have it checked
byaqualiedelectrician.
Use 120V, 60Hz, and properly grounded branch
circuit protected by a 15-amp or 20-amp circuit
breaker or time delay fuse.

Table of Contents

Other manuals for Electrolux E30GF74GPS

Related product manuals