Electrolux E30GF74GPS - Removing the Main Burner Base; Removing the Griddle Cover (36 Models with Built-In Griddle); Removing the Griddle Grease Tray; Removing the Backguard

66
67
Removing the griddle grease tray:
1. Raise the front of the griddle cover, pull the tray
towards the front of the range and lift it out.
Removing the backguard:
1. Obtain access to the rear of the range, remove
the (4) screws, two at each end.
Removing the main burner base:
1. Lift the main based to clear the igniter and off.
Removing the griddle cover: (36” models
with built-in griddle)
1. Raise the front of the griddle cover, pull a cover
forword and off.