Electrolux E30GF74GPS - Removing the Griddle OriCe (36 Inch Models with Built-In Griddle); Removing the Griddle Igniter

88
89
2. Using an adjustable wrench, disconnect
 thegastubingfromtheoriceassembly.
3. Turntheoriceassemblycounterclockwise
while holding a locking nut with a pair of needle
nose pliers.
Removing the griddle orice: (36
inch models with built-in griddle)
1. Disconnect power, and remove the griddle
 oriceassembly.
2. Usinga10mmwrenchremovetheoricefrom
 theoriceassembly.
Removing the griddle igniter:
1. Disconnect power, remove the griddle and the
left-hand drip pan.
2. Disconnect the (2) wires to the igniter.