64
faILUrE
Griddle does not operate. (36
“ model ranges)
Convection fan motor does
not run when the switch is
turned on.
Note: The convection fan
motor will not run if
the oven thermostat
is set to broil.
Ovan lights does not oper-
ate.
ChECK
1. Turn the griddle thermostat
to a temperature. Does the
griddle indicator light glow?
2. Does a griddle igniter glow?
3. Is the griddle manual shut off
turned on?
4. Measure the voltage drop
between the input terminal of
the griddle safety valve and
neutral. Does the meter read
line to neutral voltage.
1. Measure the input voltage
to the convection fan motor
switch. Does the meter read
line in neutral voltage?
2. Turn the switch on and mea-
sure the voltage drop across
the two terminals of switch.
Does the meter read line a
neutral voltage?
3. Measure the voltage drop
across the terminals of the
convection fan motor. Does
the meter read line a neutral
voltage?
1. Replace the lightbulbs. Did this
correct the problem?
2. Masure the voltage drop be-
tween the input terminal of the
light switch and neutral. Does
the meter read line to neutral
voltage?
3. Measure the voltage drop
between the output terminal
of the lightswitch and neutral.
Does the meter read line to
neutral voltage?
COrrECTION
Yes, go to step (2).
No, defective thermostat or open wire be-
tween griddle thermostat and range terminal
block.
Yes, go to step (3).
No, go to step (4).
Yes, defective igniter.
No, turn the manual shut off on.
Yes, defective griddle safety valve.
No, defective griddle igniter.
Yes, go to step (2).
No, open wire between convection switch
and range terminal block.
Yes, defective convection switch.
No, go to step (3).
Yes, block fan blade or defective convec-
tion motor.
No, defective convection fan relay.
Yes, problem solved.
No, go to step (2).
Yes, go to step (3).
No, open wire between the lightswitch, and
the range terminal block.
Yes, defective light sockets.
No, defective light switch.
To Next Page
Loading...
