Electrolux E30GF74GPS - Removing the Simmer Burner OriCe Assembly; Removing the Top Burner OriCe Assembly

90
91
5. Remove the (2) screws holding the thermostat
to the control panel and lift the thermostat out.
Removing the simmer burner
orice assembly:
1. Disconnect power, and remove the drip pan.
2 Using a 10 mm wrench disconnect the gas tube
 fromtheoriceassembly.
3. Using a 5/8” wrench release a locking nut and
 droptheoriceassemblydown.
Removing the top burner
orice assembly:
1. Disconnect power, and remove the drip pan.
2 Using a 5/8” wrench disconnect the gas tube
 fromtheoriceassembly.