86
3. Pull down on the trim, to disengages the (2)
shoulder bolts, and lift the trim off.
Removing the body side front
trim bottom bracket:
1. Disconnect power, and remove the body side
front trim.
2. Remove the (2) screws hold in the bracket to
the lower front panel and lift the bracket off.
Removing the body side:
1. Disconnect power, remove the control panel
trim, and the body side front trim.
2. Remove the backguard and rear panel.
3. Remove the (2) screws holding the body side to
the rear bracket and lift the body side off.
Removing the insulation side panels:
1. Disconnect power, and remove the side panel.
To Next Page
Loading...
