Electrolux E30GF74GPS - Removing the Bake Burner Mounting Bracket; Removing the Bake Burner Side Baffles; Removing the Side Panel Front Trims

84
85
2. Removethe(2)screwsholdingthesidebafe
 totherangebaseandliftthebafeout.
Removing the side panel front trims:
1. Remove the oven door and kickplate.
2. Remove the (4) screws holding the trim to the
oven liner frame and (2) screws holding the
trim to the bottom bracket.
3. Use in a small common screwdriver remove the
large C clamp and pull the ceramic block out
the front.
Removing the bake burner
mounting bracket:
1. Remove the bake burner.
2. Remove the (2) screws holding the burner
mounting bracket to the range base.
Removing the bake burner side bafes:
1. Remove the oven bottom and bake burner
 bafe.