Electrolux E30GF74GPS - Removing the Main Base Insulation Shield; Removing the Leveling Legs

94
95
8. Placer the range on it’s back, remove the(15)
screws holding the main base to the oven
frame and lift the main base off.
Removing the main base
insulation shield:
1. Disconnect power and remove the main base.
2. Remove the screw holding insulation shield to
the main base
and lift the shield off.
Removing the leveling legs:
1. Raise a range to take pressure off the leg.
2. Wrapthelegwithaclothtoprotectthenish,
and use a pair of channel locks or pipe
wrench to turn the upper part of the leg
counterclockwise.