How to use
44
Liquid deviation or stability is checked after setpoint is reached and Purge time is expired. If set
to 0, liquid check is disabled. Otherwise, after all crucibles have liquid check passed, balance
purging will be stopped and normal stage stop conditions (deviation or stability) continues, to
determine when to finish the stage.
Results
Result is an expression, which can use stage-based analysis data in Formulas to calculate a
value of interest.
Calibration factor to multiply result
Format to display result value
Expression to calculate result
Create application
It is necessary sometimes to change certain application settings (to example, minimum sample
weight). While it is easy to do, often it is better to create a new “specialized” application and
either call it specifically or provide in the description a reason of application creation.
To create a new application:
1. Login as Operator.(Debugger)
2. Press New button in Application window.
It is also possible to take existing application as a “base”. For this select “base” application in
the list and press Edit button. Make sure to change application Name first in General tab, so
that “base” application will not get overwritten.
3. Fill all necessary fields.
4. Add stages and results.
5. Press Ok button when finished.
Edit application
Any existing application can be edited.
To edit application:
1. Login as Operator.
2. Select application in Application window.
3. Press Edit button.
4. Edit application.
5. Press Ok button when finished.
Delete application
Unused and old applications can be deleted.
To Next Page
Loading...
Need help?
General
