EMC VNX VG2 - Iscsi Wizard Worksheets; Create an Iscsi Target Worksheet; Create an Iscsi LUN Worksheet

EMC VNX VG2/VG8 Gateway Configuration Setup Guide
296
Setup Worksheets
EMC CONFIDENTIAL
iSCSI wizard worksheets
The iSCSI wizard has two main steps. This section contains a worksheet for each
main step.
Create an iSCSI
Target worksheet
The Create an iSCSI Target step creates an iSCSI target on a Data Mover. This step
can be repeated as needed to create additional iSCSI targets.
Data Mover
❑ server_2 ❑ server_3 ❑ server_4 ❑ server_5 ❑ server_6 ❑ server_7
❑ server_8 ❑ server_9
Target Alias Name ___________________________________________
Auto Generate Target Qualified Name (recommended):
❑ Yes ❑ No
Target Portals
______________________________________
_____________________________________
_____________________________________
Create an iSCSI LUN
worksheet
The Create an iSCSI LUN step creates an iSCSI LUN on a Data Mover. This step can
be repeated as needed to create additional iSCSI LUNs.
Data Mover
❑ server_2 ❑ server_3 ❑ server_4 ❑ server_5 ❑ server_6 ❑ server_7
❑ server_8 ❑ server_9
Target Name_________________________________________________
Target Portals
______________________________________
_____________________________________
_____________________________________
File System Name____________________________________________
Create Multiple LUNs:
❑ Yes ❑ No
Number of LUNs to Create: ___________________________________