2 1019567 REV. 03
1.1 Safety Requirements and Warnings
This chapter contains an explanation of the different Safety Notice symbols and icons
found both in this manual and on the product itself and provides additional safety
information for ultrasonic welding. This chapter also describes how to contact Branson for
assistance.
1.1.1 Symbols Found in this Manual
These symbols used throughout this manual warrant special attention:
1.1.2 Symbols Found on the Product
Familiar graphic warning symbols are used to alert the user to items of concern or hazard.
The following warning symbols appear on the 2000IW/ IW+ Integrated Welder. Replace
with new labels as required.
WARNING Indicates a possible danger
If these risks are not avoided, death or severe injury might result.
CAUTION Indicates a possible danger
If these risks are not avoided, slight or minor injury might result.
NOTICE Indicates a possible damaging situation
If this situation is not avoided, the system or something in its vicinity
might get damaged.
Application types and other important or useful information are
emphasized.
Table 1.1 Safety Label Part Number
Part Number Label Description
100-065-1023
Disconnect Power, Hearing Protection Required, Do Not Touch Horn
combination label
100-065-796
Crush Pinch, Emergency Stop, Warning Keep Hands Away From
Moving Horn combination label
To Next Page
Loading...