1019567 REV. 03 15
2.2 Overview of these Models
The 2000IW and IW+ Series Integrated Welders are ultrasonic plastic joining systems.
They are used for welding plastic parts together by staking, insertion, swaging and
degating.
These welders are self contained, free standing welding systems designed for upright
vertical operation. The IW and IW+ Welders are available in 2 power levels: 1100 Watts,
and 2200 Watts. The IW+ is also available in 3300 Watts.
• For manual applications, welders can contain a base assembly with 2 Start Switches and an
Emergency Stop knob
• For Automated applications, welders can contain a hub in place of the base assembly
A typical setup will be with a standard 40-inch column (4, 5 and 6 foot lengths are also
available).
Figure 2.1 2000IW/IW+ Series Integrated Welder
NOTICE
It is advisable to have non standard length columns installed at the
factory.
To Next Page
Loading...