26 1019567 REV. 03
12 AB Delay Switch
Selects the Afterburst DELAY parameter for
modification when display lock is inactive;
displays the AB DELAY parameter in the NUMERIC
DISPLAY, and lights the AB DELAY switch LED.
13 Hold Time Switch
Selects the Hold Time parameter for modification
when display lock is inactive; displays the Hold
parameter in the NUMERIC DISPLAY, and lights
the Hold Time switch LED.
14 Mode Switch
a 2000IW+ only feature - selects between Time
and Collapse and Absolute Distance modes;
changes the display for the selected mode, and
allows for changes in mode or mode parameters
when Display Lock is inactive.
NOTICE
In Collapse or Absolute Distance Modes the weld
time parameter acts as an overriding condition.
Ensure Time is setup to allow for the collapse or
absolute distances to be attained during a weld.
15 Mode Indicator LEDs
A 2000IW+ only feature - light once you have
selected the mode you wish to alter; indicate the
mode selected.
Table 2.3 Front Panel Displays IW+
Item Name Function
To Next Page
Loading...
