Emerson Aventics G3 Series - RTD Module: Temperature Scale Settings

G3 Series EtherCAT
TM
Technical Manual
11-109
TDG3ECM1-5EN 07/2020
Subject to change without notice
www.asco.com/g3
RTD Module / Temperature Scale
Allows the temperature scale for each channel to be set to Celsius or Fahrenheit.
A) Press the SET button to enter the Temp
Scale sub menu.
B) Press the NEXT button to scroll through
the channels.
C) Press the SET button to choose the
desired channel.
D) Press the NEXT button to choose the
desired scale.
E) Press the SET button to load the
selection.
TEMP SCALE
CHANNEL 0
TEMP SCALE
CHANNEL 0
TEMP SCALE
CHANNEL 1
CHANNEL 1
FAHRENHEIT
CHANNEL 1
CELSIUS