Emerson Aventics G3 Series - RTD Module: Advanced Setting - Update Filters

G3 Series EtherCAT
TM
Technical Manual
11-111
TDG3ECM1-5EN 07/2020
Subject to change without notice
www.asco.com/g3
RTD Module / Advanced Setting
Allows the Update Filters for each channel to be set.
A) Press the SET button to enter the
Advance Settings sub-menu.
B) Press the NEXT button to choose the
option; Update Filters or Calibrate RTD.
.
Update Filters
C) Press the SET button to choose the
Update Filter setting.
D) Press the NEXT button to scroll
through the filter times.
E) Press the SET button to select the
desired Update Filter time.
ADVANCED
SETTINGS
UPDATE FILTER
5mS
UPDATE FILTER
5mS
UPDATE FILTER
10mS