Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
User Menu A Commissioning
Advanced
Parameters
Diagnostics Optimization CT MODBUS RTU Technical Data
E300 Design Guide 113
Issue Number: 1
5.12 Menus, Parameters
5.12.1 .Menu, parameter structure
The E300 Advanced Elevator drive has a full list of menus which range from Menu A through to Menu Z as detailed in Table 5-8 Full menu
descriptions . Each menu consists of groups of parameters which are specific to the Elevator application. The menus are arranged in a sequential
order to support simple set up of the drive, motor and feedback, to configuring the systems mechanical arrangement, setting up the control interface
then auto tuning and running the system for the first time along with tuning the final ride comfort.
Table 5-8 Full menu descriptions
* Only displayed when option modules are installed
User Menu A is used to bring together various commonly used parameters for the given application allowing fast access to parameters for adjustment
of the drive. The parameters displayed in the User Menu A are configured through to Z (User Menu A set-up). Once the parameters are configured,
they will then exist in both the User Menu A and in the full menu parameter list. The default configuration of User Menu A has been created using
specific parameters in an arranged sequence to allow quick sequential set-up and adjustment of the drive for standard Elevator applications. User
Menu A can consist of up to a maximum of 80 parameters which are user selectable.
Menu Description
A User Menu
BMotor
C Encoder
DBrake
E Mechanical
F IO Hardware
GProfile
H Configuration
I Tuning
J Monitoring
K Logic
L Diagnostics
M Comms
NStorage
O Backup Power
P Slot 1 set-up*
Q Slot 2 set-up*
R Slot 3 set-up*
S Application Menu 1
T Application Menu 2
U Application Menu 3
V Slot 1 Application*
W Slot 2 Application*
X Slot 3 Application*
Y Data Logger
Z User Menu A set-up
To Next Page
Loading...
