6 E300 Design Guide
Issue Number: 1
Declaration of Conformity
Control Techniques Ltd
The Gro
Newtown
Powys
UK
SY16 3BE
This declaration applies to Elevator E200 and E300 variable speed drive
products, comprising models numbers as shown below:
The AC variable speed drive products listed above have been designed
and manufactured in accordance with the following European
harmonized standards:
EN 61000-3-2:2006 Applicable where input current <16 A. No limits
apply for professional equipment where input power >1 kW.
Moteurs Leroy-Somer
Usine des Agriers
Boulevard Marcellin Leroy
CS10015
16915 Angoulême Cedex 9
France
These products comply with the requirements of the Restriction of
Hazardous Substances Directive 2011/65/EU, the Low Voltage Directive
2006/95/EC and the Electromagnetic Compatibility Directive 2004/108/
EC.
T. Alexander
Control Techniques Vice President, Technology
Newtown
Date: 20th January 2015
These electronic drive products are intended to be used with
appropriate motors, controllers, electrical protection components
and other equipment to form complete end products or systems.
Compliance with safety and EMC regulations depends upon
installing and configuring drives correctly, including using the
specified input filters. The drives must be installed only by
professional assemblers who are familiar with requirements for
safety and EMC. The assembler is responsible for ensuring that the
end product or system complies with all the relevant laws in the
country where it is to be used. Refer to the Design Guide. An EMC
Data Sheet is also available giving detailed EMC information.
Eaaa-bbbbbbbbb Valid characters:
aaa 200, 300
bbbbbbbbb
03200050A, 03200066A, 03200080A,
03200106A, 03400025A, 03400031A,
03400045A, 03400062A, 03400078A,
03400100A
04200137A, 04200185A, 04400150,
04400172A
05200250A, 05400270A, 05400300A,
05500030A, 05500040A, 05500069A
06200330A, 06200440A, 06400350A,
06400420A, 06400470A, 06500100A,
06500150A, 06500190A, 06500230A,
06500290A, 06500350A
07200610A, 07200750A, 07200830A,
07400660A, 07400770A, 07401000A,
07500440A, 07500550A, 07600190A,
07600240A, 07600290A, 07600380A,
07600440A, 07600540A
EN 61800-5-1:2007
Adjustable speed electrical power drive
systems - safety requirements - electrical,
thermal and energy
EN 61800-3:2004
Adjustable speed electrical power drive
systems. EMC product standard including
specific test methods
EN 61000-6-2:2005
Electromagnetic compatibility (EMC). Generic
standards. Immunity standard for industrial
environments
EN 61000-6-4:2007
Electromagnetic compatibility (EMC). Generic
standards. Emission standard for industrial
environments
EN 61000-3-2:2006
Electromagnetic compatibility (EMC), Limits,
Limits for harmonic current emissions
(equipment input current <16 A per phase)
EN 61000-3-3:2008
Electromagnetic compatibility (EMC), Limits,
Limitation of voltage fluctuations and flicker in
low-voltage supply systems for equipment
with rated current <16 A
To Next Page
Loading...
Need help?
General