Emerson E300 Series User Manual

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
User Menu A Commissioning
Advanced
Parameters
Diagnostics Optimization CT MODBUS RTU Technical Data
E300 Design Guide 425
Issue Number: 1
8.15 Menus P, Q and R: Option module set-up
Figure 8-38 Location of option module slots and their corresponding menu numbers
1. Solutions Module Slot 1 - Menu P
2. Solutions Module Slot 2 - Menu Q
3. Solutions Module Slot 3 - Menu R
8.15.1 Parameters common to all categories
The option module ID indicates the type of module that is installed in the corresponding slot. See the relevant option module user guide for more
information regarding the module.
Parameter Range(
Ú) Default(Ö)Type
mm01 Module ID 0 to 65535
RO Num ND NC PT
mm02 Software Version 00.00.00 to 99.99.99 RO Num ND NC PT
mm03 Hardware Version 0.00 to 99.99 RO Num ND NC PT
mm04 Serial Number LS
0 to 99999999
RO Num ND NC PT
mm05 Serial Number MS RO Num ND NC PT
Option module ID Module Category
0 No module installed
209 SI-I/O Automation (I/O Expansion)
310 MCi 210
Automation (Applications)311 MCi 200
304 SI-Applications Plus
443 SI-PROFIBUS
Fieldbus447 SI-DeviceNet
448 SI-CANopen

Emerson E300 Series Specifications

General

Brand	Emerson
Model	E300 Series
Category	DC Drives
Language	English