Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
User Menu A Commissioning
Advanced
Parameters
Diagnostics Optimization CT MODBUS RTU Technical Data
20 E300 Design Guide
Issue Number: 1
Table 2-9 Keypad identification
Table 2-10 Additional options
Automation
(Applications)
Moss Green MCi 200
Machine Control Studio compatible applications processor
2nd processor for running pre-defined and/or customer created application software.
Moss Green MCi 210
Machine Control Studio compatible applications processor (with Ethernet
communications)
2nd processor for running pre-defined and/or customer created application software
with Ethernet communications.
Black SI-Applications Plus
SyPTPro compatible applications processor (with CTNet)
2nd processor for running pre-defined and/or customer created application software
with CTNet support (can only be used on Slot 3).
Type Color Name Further Details
Type Name Further Details
Keypad
KI-Elv Keypad RTC
LCD RTC keypad option
Keypad with LCD display and real time clock
CI-Elv Remote Keypad
LCD Remote keypad option
Keypad with LCD display which can be mounted remotely (KI-485 Adaptor and CT USB comms cable
required)
Type Name Further Details
Back-up
SD Card Adaptor
SD card adaptor
Allows the drive to use an SD card for drive back-up
SMARTCARD
SMARTCARD
Used for parameter back-up with the drive
Communications
KI-485 Adaptor
485 Comms adaptor
485 Comms adaptor provides 485 communication interface and connection of the remote keypad. This
adaptor supports 115 k Baud, node addresses between 1 to 16 and 8 1 NP M serial mode.
CT USB comms cable
Comms cable
CT USB to RJ485 comms cable for use with KI-485 Adaptor to provide communications interface
To Next Page
Loading...
