Emerson E300 Series - Page 40

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
User Menu A Commissioning
Advanced
Parameters
Diagnostics Optimization CT MODBUS RTU Technical Data
40 E300 Design Guide
Issue Number: 1
Figure 3-17 Through panel mounting the size 6 drive
The outer holes plus the hole located in the center of the bracket are to be used for through panel mounting.
Figure 3-18 Through panel mounting the size 7 drive
196 mm (7.72 in)
Ø7.0 mm (0.276 in)98 mm (3.86 in)
101 mm (3.98 in)
202 mm (7.95 in)
101 mm (3.98 in)
Radius 1.0 mm
(0.04 in)
98 mm (3.86 in)
26 mm (1.02 in)
120 mm (4.73 in)
26
mm
(1.02 in)
227 mm (8.94)
131 mm (5.16 in)
412 mm (16.22 in)
210 mm (8.27 in)
96 mm (3.78 in)
365 mm (14.37 in)
356 mm (14.02 in)
399 mm (15.71)
264 mm (10.39 in)
21 mm (0.83 in)
167 mm (6.58 in)
Æ 5.0 mm
(0.20 in)
26 mm (1.02 in)
NOTE
220 mm (8.66 in)
252 mm (9.92 in)
310 mm (12.20 in)
2
5
2
m
m
(
9
.
9
2
i
n
)
538 mm (21.18 in)
488 mm (19.21 in)
278 mm (10.95 in)
∅
9mm (0.35 in)
330 mm (12.99 in)
270 mm (10.63 in)
245 mm (9.65 in)
188 mm (7.40 in)
508 mm (20.0 in)
92 mm (3.62 in)